Self Aligning Ball Bearings
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing , which can be caused, for example, by shaft deflection. A self-aligning bearing is recommended when the alignment of the shaft and housing is difficult or when the shaft may bend during operation. Brda notes that similar to deep groove ball bearings, most self-aligning ball are for general use.
Self-aligning Ball Bearings are particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection. This bearing should only be used in light axial load applications due to the small axial capacity.Self-Aligning Ball Bearings utilize two rows of balls and a common, concave outer race to automatically compensate for angular misalignment within a system. Misalignment, either from machining errors, assembly errors, or deflections, are a common risk in precise applications and Self-Aligning Ball Bearings present a viable solution.

- 25 mm x 62 mm x 24 mm FAG 2305-2RS-TVH self aligning ball bearings
- C0-Medium
- CONSOLIDATED BEARING

- ISB TSF 30 BB self aligning ball bearings
- 0883450361033
- Inch

- Toyana 2313K+H2313 self aligning ball bearings
- 2.75 Inch | 69.85 Mi
- 8483.20.40.80

- 95 mm x 170 mm x 43 mm ISO 2219K+H319 self aligning ball bearings
- SUCSF 210 50MM L3
- 9/16 Inch

- 15 mm x 42 mm x 13 mm ISO 1302 self aligning ball bearings
- 2 Bolt Pillow Block;
- Metric

- Toyana 2209K-2RS+H309 self aligning ball bearings
- 31 mm
- FLZ204-

- 20,000 mm x 47,000 mm x 18,000 mm SNR 2204KEEG15 self aligning ball bearings
- N/A
- ABB MOTORS AND MECHA