Thrust Ball Bearings
Thrust ball bearings are manufactured as single direction or double direction thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load. They are designed to accommodate axial loads only and must not be subjected to any radial load.Thrust ball bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads.Thrust Ball Bearings Online shopping by VXB bearings the online bearing store and supplier, wholesale prices and same day shipping, next day air shipping available.
Thrust bearings must be kept in matched sets. The bore (d dimensions) of one washer (smaller) in the set will conform to the specifications. The bore (d dimension) of the mating washer will be ~ .007” larger because it is a clearance hole for the shaft.
- INA FTO14 thrust ball bearings
- 1 in
- 0.1650 in
- NTN 562040M thrust ball bearings
- R154.08
- VKBA 910
- 80 mm x 125 mm x 22 mm SKF NU 1016 thrust ball bearings
- 1 in
- 0.1650 in
- 180 mm x 300 mm x 37 mm NSK 52336X thrust ball bearings
- 4500 fpm
- Exceptional Bearing
- RHP XLT3.1/4 thrust ball bearings
- 1 in
- 0.1650 in
- 35 mm x 72 mm x 23 mm SKF NU 2207 ECP thrust ball bearings
- Set Screw
- 2.0000 in
- Timken 120TVB511 thrust ball bearings
- 223 kN
- 104,775 mm
- SKF FBSA 204/QBC thrust ball bearings
- Set Screw
- 2.0000 in
- 40 mm x 90 mm x 23 mm FAG 7603040-TVP thrust ball bearings
- 223 kN
- 104,775 mm